AF-OS405

AF-OS405 Visual Fault Locator The AF-OS405 (635nm) visible laser cable fault locator allows the operator to find faults in fiber optic cables, even in the OTDR dead zone, optimizing splices and tracing fibers. By injecting a bright red visible light in the fiber, locations of losses such as breaks, bends, or bad connectors can be detected visually, even through the typical yellow or orange jacket used on most single fiber cables. Light generated by these units will escape from sharp bends and breaks in jacketed or bare fibers, as well as poorly mated connectors. Fibers can be traced as far as 4 km (2.5 mi.) using this instrument. The AF-OS405 uses a visible diode laser in the compact case for pocket size convenience. Other applications include identifying connectors in patch panels and fibers during splicing operations. It is also a useful tool for continuity end-to-end checks. The unit comes in a choice of three connector options ST, FC or SC.   .pdf datasheet

Key Features:  Applications: Cable Fault locator 635nm class II laser Low battery indicator High output power ~ 1mW CW & 1hz option ST, FC or SC connector option Ruggedised case Protective Rubber boot

AF-OS405	SPECIFICATIONS, KEY FEATURES AND APPLICATIONS
Applications	Multimode and Single mode
Modulation	CW or 1Hz
Wavelength(λ)	635nm ± 10 nm Class II laser
Output Power	~ 1mW
Connector Styles	ST, FC or SC
Controls	3 Position switch, CW - OFF - 1Hz
Power	2AA Batteries or AC Power Converter
Low Battery Indicator	Yes
Enclosure Size	Compact Handheld (L-4.94"/W-2.75"/H-1.2")
Operation Temperature	-10°C to +50°C (45% Hum, non condensing)
Storage Temperature	-20°C to +60°C (75% Hum, non condensing)
Protective Rubber boot	Added Feature

Powered by Register.com